1 Lay a cotton bath towel on a table area to shield the lid of one’s laptop from scratches. This towel also can catch tiny screws as you get rid of them from the laptop case.
two Unplug the AC adapter and pop out the battery. Press down around the “On” button for a couple of seconds to bleed off any electricity that may be inside the motherboard. Otherwise, any time you start out handling internal components, you risk shorting out the motherboard if any stray charge or static electricity is present. To become extra cautious, ground oneself by touching a piece of metal ahead of continuing. In case you get up from the operate region, ground your self again prior to continuing your perform.
three Close the laptop lid. Turn the laptop over on its lid, on top on the towel, and examine the layout with the different plastic panels around the bottom of the laptop. The smaller access panels most likely cover the memory chips and also the internal wireless network card. Appear to get a panel about the size and shape of a deck of cards, using a symbol of a hard drive embossed on the plastic.
1 Loosen and remove the compact screws holding the access panel in location. Use gentle stress when the screws seem incredibly stubborn or tight. Prevent “stripping” the heads of the screws by utilizing as well much twisting pressure. Be cautious not to use a lot pressure which you crack the delicate laptop screen. Gently remove the access panel cover and set it aside, together with the screws resting on the cover.
2 Examine the difficult drive. If it appears to become held down inside the cavity by an additional set of tiny screws, take away them.
3 Notice the finish in the hard drive that is definitely connected to a cable or connector head. Meticulously pull the difficult drive away from this connector head although the drive is in its “flat” position. Never bend the really hard drive upwards. Use your fingers to slide the drive straight back and away from the connector until it pops totally free.